Snmp-Server Engineid Local - Allied Telesis AT-AR3050S Command Reference Manual

SNMP C
OMMANDS
- ID
SNMP SERVER ENGINE LOCAL

snmp-server engineID local

Overview Use this command to configure the SNMPv3 engine ID. The SNMPv3 engine ID is
used to uniquely identify the SNMPv3 agent on a device when communicating
with SNMP management clients. Once an SNMPv3 engine ID is assigned, this
engine ID is permanently associated with the device until you change it.
Use the no variant of this command to set the user defined SNMPv3 engine ID to a
system generated pseudo-random value by resetting the SNMPv3 engine. The no
snmp-server engineID local command has the same effect as the snmp-server
engineID local default command. Note that the
command is used to force the system to generate a new engine ID when the
current engine ID is also system generated.
snmp-server engineID local {<engine-id>|default}
Syntax
no snmp-server engineID local
Mode Global Configuration
Usage All devices must have a unique engine ID which is permanently set unless it is
configured by the user.
Example To set the SNMPv3 engine ID to 800000cf030000cd123456, use the following
commands:
awplus#
awplus(config)#
800000cf030000cd123456
To set a user defined SNMPv3 engine ID back to a system generated value, use the
following commands:
awplus#
awplus(config)#
Output The following example shows the engine ID values after configuration:
C613-50077-01 REV A
Parameter Description
<engine-id>
Specify SNMPv3 Engine ID value, a string of up to 27 characters.
default
Set SNMPv3 engine ID to a system generated value by resetting the
SNMPv3 engine, provided the current engine ID is user defined. If the
current engine ID is system generated, use the
local reset
ID.
configure terminal
snmp-server engineID local
configure terminal
no snmp-server engineID local
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
snmp-server engineID local reset
command to force the system to generate a new engine
snmp-server engineID
1965