Ipv6 Address (Entity) - Allied Telesis AT-AR3050S Command Reference Manual

A E C
PPLICATION AND NTITY OMMANDS
6 (E )
IPV ADDRESS NTITY

ipv6 address (Entity)

Overview Use this command to assign an IPv6 address to a host entity.
Use the no variant of this command to remove an IPv6 address from an host entity.
Syntax ipv6 address <ipv6-address>
ipv6 address dynamic interface <interface_name>
no ipv6 address <ipv6-address>
no ipv6 address dynamic interface <interface_name>
Mode Host Mode
Usage You can add multiple IPv6 addresses to a host entity. If the IPv6 address is not in
the scope of any of its parent network's IPv6 subnets, a warning message will be
given. Such an IP address is still acceptable because in the future the user may
assign a network subnet that contains the host's IPv6 address. Firewall policy rules
will not apply to an IPv6 address that is not in at least one of the network's subnets.
To add an IPv6 address to host web-server, use the commands:
Examples
awplus#
awplus(config)#
awplus(config-zone)#
awplus(config-network)#
awplus(config-network)#
awplus(config-host)#
To add multiple IP addresses to host web-server, use the commands:
awplus#
awplus(config)#
awplus(config-zone)#
awplus(config-network)#
awplus(config-network)#
awplus(config-host)#
awplus(config-host)#
awplus(config-host)#
C613-50077-01 REV A
Parameter
<ipv6-address>
dynamic
<interface_name>
configure terminal
zone dmz
configure terminal
zone dmz
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Description
The IPv6 address in the format x:x::x:x.
Dynamic IPv6 address, for example, obtained from a DHCP
server.
Interface to acquire IP addresses from.
network servers
ipv6 subnet 2001:db8:24:100::/64
host web-server
ipv6 address 2001:db8:24:100::1
network servers
ipv6 subnet 2001:db8:24:100::/64
host web-server
ipv6 address 2001:db8:24:100::2
ipv6 address 2001:db8:24:100::3
ipv6 address 2001:db8:24:100::4
2131