Disable (Vrrp) - Allied Telesis AT-AR3050S Command Reference Manual

VRRP C
OMMANDS
(VRRP)
DISABLE

disable (VRRP)

Overview Use this command to disable a VRRP IPv4 session or a VRRPv3 IPv6 session on the
router to stop it participating in virtual routing. Note that when this command is
configured then a backup router assumes the role of master router depending on
its priority. See the
VRRPv3 IPv6 session on the router.
disable
Syntax
Mode Router Configuration
Usage See the
about VRRPv3 IPv4 and IPv6 configuration details.
Examples The example below shows you how to disable the VRRP session for VRRP VR ID 5
on vlan2:
awplus#
awplus(config)#
awplus(config-router)#
The example below shows you how to disable the VRRPv3 session for VRRPv3 VR
ID 3 on vlan1:
awplus#
awplus(config)#
awplus(config-router)#
Related enable (VRRP)
Commands
router vrrp (interface)
router ipv6 vrrp (interface)
show vrrp
C613-50077-01 REV A
enable (VRRP)
VRRP Feature Overview and Configuration Guide
configure terminal
router vrrp 5 vlan2
configure terminal
router ipv6 vrrp 3 vlan1
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
command to enable a VRRP IPv4 session or a
disable
disable
for more information
1652