Allied Telesis AT-AR3050S Command Reference Manual page 1714

A T M F
LLIED ELESIS ANAGEMENT
( )
ATMF GROUP MEMBERSHIP
Example 1 To specify the device to become a member of AMF groups named marketing, sales,
and building_2, use the following commands:
node-1#
node-1(config)#
Example 2 To add the nodes member_node_1 and member_node_2 to groups building1 and
sales, first add the nodes to the working-set:
master_node#
This command returns the following output confirming that the nodes
member_node_1 and member_node_2 are now part of the working-set:
Then add the members of the working set to the groups:
atmf-net[2]#
atmf-net[2](config)#
atmf-net[2](config)#
atmf-net[2]#
This command returns the following output displaying the groups that are
members of the working-set.
Related show atmf group
Commands
show atmf group members
C613-50077-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
configure terminal
atmf group marketing,sales,building_2
atmf working-set member_node_1,member_node_2
============================
member_node_1, member_node_2
============================

Working set join
configure terminal
show atmf group
====================
member_node_1
====================

AMF group information

building1, sales
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
atmf group building1,sales
exit
1714