Aaa Authentication Login - Allied Telesis AT-AR3050S Command Reference Manual

AAA C
OMMANDS

AAA AUTHENTICATION LOGIN

aaa authentication login
Overview Use this command to create an ordered list of methods to use to authenticate user
login, or to replace an existing method list with the same name. Specify one or
more of the options local or group, in the order you want them to be applied. If
the default method list name is specified, it is applied to every console and VTY
line immediately unless another method list is applied to that line by the
authentication
the
Use the no variant of this command to remove an authentication method list for
user login. The specified method list name is deleted from the configuration. If the
method list name has been applied to any console or VTY line, user login
authentication on that line will fail.
Note that the no aaa authentication login default command does not remove
the default method list. This will return the default method list to its default state
(local is the default).
aaa authentication login {default|<list-name>} {[local] [group
Syntax
{radius|tacacs+|<group-name>}]}
no aaa authentication login {default|<list-name>}
Default If the default server is not configured using this command, user login
authentication uses the local user database only.
If the default method list name is specified, it is applied to every console and VTY
line immediately unless a named method list server is applied to that line by the
loginauthentication command.
local is the default state for the default method list unless a named method list is
applied to that line by the login authentication command. Reset to the default
method list using the no aaa authentication login default command.
Mode Global Configuration
C613-50077-01 REV A
command. To apply a non-default method list, you must also use
login authentication
Parameter
default
<list-name>
local
group
radius
tacacs+
<group-name>
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
command.
Description
Set the default authentication server for user login.
Name of authentication server.
Use the local username database.
Use server group.
Use all RADIUS servers configured by the
host command.
Use all TACACS+ servers configured by the
host command.
Use the specified RADIUS server group, as configured by
the aaa group server
radius-server
tacacs-server
command.
login
1561