Show Ipv6 Dhcp - Allied Telesis AT-AR3050S Command Reference Manual

DHCP IP 6 (DHCP 6) C
FOR V V OMMANDS
6
SHOW IPV DHCP

show ipv6 dhcp

Overview Use this command in User Exec or Privileged Exec mode to show the DHCPv6
unique identifier (DUID) configured on your device.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
show ipv6 dhcp
Syntax
Mode User Exec and Privileged Exec
Usage The DUID is based on the link-layer address for both DHCPv6 client and DHCPv6
server identifiers. The device uses the MAC address from the lowest interface
number for the DUID.
The DUID is used by a DHCPv6 client to obtain an IPv6 address from a DHCPv6
server. A DHCPv6 server compares the DUID with its database of DUIDs and sends
configuration data for an IPv6 address plus the preferred and valid lease time
values to a DHCPv6 client.
Example To display the DUID configured on your device, use the command:
awplus#
Output Figure 38-4: Example output from the show ipv6 dhcp command
Related ipv6 address dhcp
Commands
C613-50077-01 REV A
Guide.
show ipv6 dhcp
awplus#show ipv6 dhcp
DHCPv6 Server DUID: 0001000117ab6876001577f7ba23
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
"Getting Started with AlliedWare Plus" Feature Overview
1915