Show Ssh Server - Allied Telesis AT-AR3050S Command Reference Manual

S S (SSH) C
ECURE HELL OMMANDS

SHOW SSH SERVER

show ssh server
Overview This command displays the current configuration of the Secure Shell server.
Note that changes to the SSH configuration affects only new SSH sessions coming
from remote hosts, and does not affect existing sessions.
Syntax show ssh server
Mode User Exec, Privileged Exec and Global Configuration
Example To display the current configuration of the Secure Shell server, use the command:
awplus#
Output Figure 42-8: Example output from the show ssh server command
Table 8: Parameters in the output of the show ssh server command
C613-50077-01 REV A
show ssh server
Secure Shell Server Configuration
----------------------------------------------------------------
SSH Server
Port
Version
Services
User Authentication
Resolve Hosts
Session Timeout
Login Timeout
Maximum Authentication Tries
Maximum Startups
Debug
Parameter
SSH Server
Port
Version
Services
Authentication
Login Timeout
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
: Enabled
: 22
: 2
: scp, sftp
: publickey, password
: Disabled 
: 0 (Off) 
: 60 seconds 
: 6
: 10
: NONE
Description
Whether the Secure Shell server is enabled or disabled.
TCP port where the Secure Shell server listens for
connections. The default is port 22.
SSH server version; either "1", "2" or "2,1".
List of the available Secure Shell service; one or more of
SHELL, SCP or SFTP.
List of available authentication methods.
Time (in seconds) that the SSH server will wait the SSH
session to establish. If the value is 0, the client login will be
terminated when TCP timeout reaches.
2014