Aaa Accounting Auth-Web Default - Allied Telesis AT-AR3050S Command Reference Manual

AAA C
OMMANDS
-
AAA ACCOUNTING AUTH WEB DEFAULT

aaa accounting auth-web default

Overview This command configures a default accounting method list for Web-based Port
Authentication. The default accounting method list specifies what type of
accounting messages are sent and specifies which RADIUS Servers the accounting
messages are sent to. The default accounting method list is automatically applied
to interfaces with Web-based Authentication enabled.
Use the no variant of this command to disable AAA accounting for Web-based Port
Authentication globally.
aaa accounting auth-web default {start-stop|stop-only|none}
Syntax
group {<group-name>|radius}
no aaa accounting auth-web default
Default RADIUS accounting for Web-based Port Authentication is disabled by default.
Mode Global Configuration
Usage There are two ways to define servers where RADIUS accounting messages are sent:
•
•
Configure the accounting event to be sent to the RADIUS server with the following
options:
•
•
•
C613-50077-01 REV A
Parameter Description
start-stop
Start and stop records to be sent.
stop-only
Stop records to be sent.
none
No accounting record to be sent.
<group-name>
Server group name.
radius
Use all RADIUS servers.
group radius : use all RADIUS servers configured by
command
group <group-name> : use the specified RADIUS server group configured
with the aaa group server
start-stop : sends a start accounting message at the beginning of a session
and a stop accounting message at the end of the session.
stop-only : sends a stop accounting message at the end of a session.
none : disables accounting.
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
command
radius-server host
1550