Table of Contents
Advertisement
Maximum Ratings
Table 33-1. Absolute Maximum Ratings
Instantaneous Maximum Current
Single pin limit (applies to all pins)
Operating Temperature Range (Packaged)
Storage Temperature Range
Maximum operating junction temperature
ESD Target for Human Body Model
1
Functional operating conditions are given in DC Electrical Specifications. Absolute Maximum
Ratings are stress ratings only, and functional operation at the maxima is not guaranteed.
Stress beyond those listed may affect device reliability or cause permanent damage to the
device.
2
This device contains circuitry protecting against damage due to high static voltage or
electrical fields; however, it is advised that normal precautions be taken to avoid application of
any voltages higher than maximum-rated voltages to this high-impedance circuit. Reliability of
operation is enhanced if unused inputs are tied to an appropriate logic voltage level (e.g.,
either V
or V
SS
3
Input must be current limited to the value specified. To determine the value of the required
current-limiting resistor, calculate resistance values for positive and negative clamp voltages,
then use the larger of the two values. 6.0V voltage excludes XTAL and EXTAL pads.
4
All functional non-supply pins are internally clamped to V
5
Power supply must maintain regulation within operating V
operating maximum current conditions. If positive injection current (V
I
, the injection current may flow out of V
DD
out of regulation. Insure external V
current. This will be the greatest risk when the MCU is not consuming power (ex; no
clock).Power supply must maintain regulation within operating V
instantaneous and operating maximum current conditions.
6
All ESD testing methodology is in conformity with CDF-AEC-Q100 Stress Test
Qualification for Automotive Grade Integrated Circuits.
33-2
Rating
3, 4, 5
6
).
DD
load will shunt current greater than maximum injection
DD
MCF5282 User's Manual
1, 2
(Continued)
Symbol
Value
I
D
T
– 40 to 85
A
T
– 65 to 150
stg
T
105
j
HBM
2000
and V
.
SS
DD
range during instantaneous and
DD
and could result in external power supply going
DD
range during
DD
Unit
25
mA
°C
°C
o
C
V
> V
) is greater than
in
DD
MOTOROLA
Advertisement
Table of Contents
