Voice Services; Ui Overview - Mitel 6915 User Manual

Getting started
If your phone did not successfully connect to the network, the Network Disconnected prompt appears on
the display and the telephone status light turns on.
Check that the cables are tightly connected to the phone and to the wall jack. The phone should
automatically detect when it is reconnected and remove the Network Disconnected prompt from the
screen. However, if changes have been made to your phone's network settings, you may need to restart
your phone. Check with your System or Network Administrator for assistance.
For more information about connecting your phone, see the Mitel 6915 IP Phone Installation Guide.
Note:
If the phone displays a No Service status message you can still use the phone but note that it is not
registered with the Registrar. For more information about registering your phone, contact your System
Administrator.
5.2

Voice Services

The Mitel 6915 SIP phone can be configured to provide remote workers access to the same rich
communications capabilities as in-office workers using Voice Services.
Note:
Voice Services should be configured by your System Administrator or under his/her direction.
Changing the Voice Services settings can have detrimental effects on phone behavior. Contact your
system administrator for more information.
5.3

UI overview

Home screen
15
Version 1.0
User Guide