Fabric Summary Report - Brocade Communications Systems WFT-2D User Manual

Fabric Summary report

The Fabric Summary report provides a summary of the discovered fabrics, switches and Access
Gateway (AG) devices associated with the fabric as well as ISL and trunk details.
Table 20
content and table functions, refer to
TABLE 20
Fabric Summary report fields and components
Field/Component
Fabric Details table
Fabric Name
Switch Assigned Fabric Name
Seed Switch WWN
Seed Switch IP Address
Switch Count
Fabric Port Count
Unlicensed Fabric Port Count
AG Count
AG Port Count
Location
Description
Contact
Discovered Time
Last Changed Time
Active Zoneset
Total number of Initiator Devices
Total number of Target Devices
Total number of Initiator-Target Devices
Total number of Unknown Devices
Grand total number of Devices
Switch /AG Details table
Switch Name
AG Mode
Domain ID
IP Address
Switch WWN
Firmware Version
Switch Model
Port Count
Brocade Network Advisor SAN User Manual
53-1003154-01
describes the fields and components of the Fabric Summary Report. For general report
Description
The name of the fabric.
The switch assigned fabric name.
The world wide name of the seed switch.
The IP address of the seed switch.
The number of switches in the fabric.
The number of physical ports in the fabric.
The number of unlicensed ports in the fabric.
The number of AG devices in the fabric.
The number of ports on AG devices in the fabric.
The location of the fabric.
The description of the fabric.
The name of the person or group you should contact about the fabric.
The date and time the fabric was discovered.
The date and time when there was a change in the fabric.
The name of the zone configuration which is currently active in the fabric.
The number of initiator devices in the fabric.
The number of target devices in the fabric.
The number of initiator and target devices in the fabric.
The number of unknown devices in the fabric.
The number of devices in the fabric.
The name of the switch. Click to launch the Switch report.
Whether or not the switch is running in AG mode.
The Domain ID for the switch in the format xx(yy), where xx is the normalized value and yy is the
actual value on the wire.
The IP address (IPv4 or IPv6 format) of the physical switch. Click to launch the Switch report.
The world wide name of the virtual switch.
The firmware version of the switch.
The model of the switch.
The number of ports on the switch.
"Report content and functions"
Reports
on page 261.
6
249