Measure:statistics:mcount - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:MEASure:STATistics:MCOunt

Command Syntax
:MEASure:STATistics:MCOunt <setting>
<setting> ::= {INFinite | <count>}
<count> ::= 2 to 2000 in NR1 format
The :MEASure:STATistics:MCOunt command specifies the maximum
number of values used when calculating measurement statistics.
Query Syntax
:MEASure:STATistics:MCOunt?
The :MEASure:STATistics:MCOunt? query returns the current measurement
statistics max count setting.
Return Format
<setting><NL>
<setting> ::= {INF | <count>}
<count> ::= 2 to 2000
See Also •
•
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
"Introduction to :MEASure Commands"
":MEASure:RESults" on page 438
":MEASure:STATistics"
":MEASure:STATistics:DISPlay"
":MEASure:STATistics:RSDeviation"
":MEASure:STATistics:RESet"
":MEASure:STATistics:INCRement"
on page 406
on page 446
on page 447
on page 451
on page 450
on page 448
20
:MEASure Commands
449