:POWer:EFFiciency:APPLy
Command Syntax
:POWer:EFFiciency:APPLy
The :POWer:EFFiciency:APPLy command applies the effieciency power
analysis.
Efficiency analysis tests the overall efficiency of the power supply by
measuring the output power over the input power.
Efficiency analysis requires a 4-channel oscilloscope because input voltage, input current,
N O T E
output voltage, and output current are measured.
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see
page
1138)
":MEASure:EFFiciency"
":MEASure:IPOWer"
on page 479
":MEASure:OPOWer"
on page 476
on page 482
24
:POWer Commands
535