Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual page 103

Table 17 :MEASure Commands Summary (continued)
Command
n/a
n/a
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
Query
:MEASure:TEDGe?
<slope><occurrence>[,
<source>] (see
page 452)
:MEASure:TVALue?
<value>,
[<slope>]<occurrence>
[,<source>] (see
page 454)
Commands Quick Reference
Options and Query Returns
<slope> ::= direction of the
waveform
<occurrence> ::= the transition
to be reported
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>} for
DSO models
<source> ::= {CHANnel<n> |
DIGital<d> | FUNCtion | MATH |
WMEMory<r>} for MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<return_value> ::= time in
seconds of the specified
transition
<value> ::= voltage level that
the waveform must cross.
<slope> ::= direction of the
waveform when <value> is crossed.
<occurrence> ::= transitions
reported.
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>} for
DSO models
<source> ::= {CHANnel<n> |
DIGital<d> | FUNCtion | MATH |
WMEMory<r>} for MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<return_value> ::= time in
seconds of specified voltage
crossing in NR3 format
4
103