Hardcopy:network:domain - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:HARDcopy:NETWork:DOMain

Command Syntax
:HARDcopy:NETWork:DOMain <domain>
<domain> ::= quoted ASCII string
The :HARDcopy:NETWork:DOMain command sets the Windows network
domain name.
The domain name setting is a common setting for both network printer
slots.
Query Syntax
:HARDcopy:NETWork:DOMain?
The :HARDcopy:NETWork:DOMain? query returns the current Windows
network domain name.
Return Format
<domain><NL>
<domain> ::= quoted ASCII string
See Also •
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
"Introduction to :HARDcopy Commands"
":HARDcopy:NETWork:SLOT"
":HARDcopy:NETWork:APPLy"
":HARDcopy:NETWork:ADDRess"
":HARDcopy:NETWork:USERname"
":HARDcopy:NETWork:PASSword"
on page 358
on page 369
on page 366
on page 365
on page 370
on page 368
17
:HARDcopy Commands
367