Hardcopy:palette - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:HARDcopy:PALette

Command Syntax
:HARDcopy:PALette <palette>
<palette> ::= {COLor | GRAYscale | NONE}
The :HARDcopy:PALette command sets the hardcopy palette color.
The oscilloscope's print driver cannot print color images to color laser
printers, so the COLor option is not available when connected to laser
printers.
Query Syntax
:HARDcopy:PALette?
The :HARDcopy:PALette? query returns the selected hardcopy palette color.
Return Format
<palette><NL>
<palette> ::= {COL | GRAY | NONE}
See Also
•
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
"Introduction to :HARDcopy Commands"
":HARDcopy:STARt" on page 373
":HARDcopy:FACTors"
":HARDcopy:LAYout"
":HARDcopy:FFEed"
":HARDcopy:INKSaver"
on page 361
on page 364
on page 362
on page 363
:HARDcopy Commands
on page 358
17
371