Power:signals:vmaximum:onoff:on - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:POWer:SIGNals:VMAXimum:ONOFf:ON

Command Syntax
:POWer:SIGNals:VMAXimum:ONOFf:ON <value>[suffix]
<value> ::= Maximum expected input Voltage in NR3 format
[suffix] ::= {V | mV}
The :POWer:SIGNals:VMAXimum:ONOFf:ON command specifies the
maximum expected input voltage. This value is used to set the vertical
scale of the channel probing voltage for turn on analysis.
Query Syntax
:POWer:SIGNals:VMAXimum:ONOFf:ON?
The :POWer:SIGNals:VMAXimum:ONOFf:ON query returns the expected
maximum input voltage setting.
Return Format
<value><NL>
<value> ::= Maximum expected input Voltage in NR3 format
See Also
•
•
•
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
":POWer:ONOFf:APPLy"
":POWer:SIGNals:AUTosetup"
":POWer:SIGNals:DURation:ONOFf:ON"
":POWer:SIGNals:IEXPected"
":POWer:SIGNals:OVERshoot"
":POWer:SIGNals:VSTeady:ONOFf:ON"
":POWer:SIGNals:SOURce:CURRent<i>"
":POWer:SIGNals:SOURce:VOLTage<i>"
on page 553
on page 564
on page 570
on page 573
on page 574
on page 579
on page 581
on page 582
24
:POWer Commands
577