Wgen:modulation:state - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

33
:WGEN Commands

:WGEN:MODulation:STATe

Command Syntax
:WGEN:MODulation:STATe <setting>
<setting> ::= {{OFF | 0} | {ON | 1}}
The :WGEN:MODulation:STATe command enables or disables modulated
waveform generator output.
You can enable modulation for all waveform generator function types
except pulse, DC, and noise.
Query Syntax
:WGEN:MODulation:STATe?
The :WGEN:MODulation:STATe? query returns whether the modulated
waveform generator output is enabled of disabled.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also •
•
•
•
•
•
•
•
•
1022
(see page 1138)
":WGEN:MODulation:AM:DEPTh"
":WGEN:MODulation:AM:FREQuency"
":WGEN:MODulation:FM:DEViation"
":WGEN:MODulation:FM:FREQuency"
":WGEN:MODulation:FSKey:FREQuency"
":WGEN:MODulation:FSKey:RATE"
":WGEN:MODulation:FUNCtion"
":WGEN:MODulation:FUNCtion:RAMP:SYMMetry"
":WGEN:MODulation:TYPE"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 1013
on page 1014
on page 1015
on page 1016
on page 1017
on page 1018
on page 1019
on page 1023
on page 1020