Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual page 212

6
Root (:) Commands
Table 75 Overload Event Enable Register (OVL) (continued)
Bit
1
0
Query Syntax
:OVLenable?
The :OVLenable query returns the current enable mask value contained in
the Overload Event Enable Register.
Return Format
<enable_mask><NL>
<enable_mask> ::= integer in NR1 format.
See Also •
•
•
•
•
•
•
•
212
Description
Channel 2 OVL
Channel 1 OVL
"Introduction to Root (:) Commands"
":CHANnel<n>:PROTection"
":OPEE (Operation Status Enable Register)"
":OPERegister:CONDition (Operation Status Condition Register)"
page 207
":OPERegister[:EVENt] (Operation Status Event Register)"
":OVLRegister (Overload Event Register)"
"*STB (Read Status Byte)"
"*SRE (Service Request Enable)"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
When Set (1 = High = True), Enables:
Event when overload occurs on Channel 2 input.
Event when overload occurs on Channel 1 input.
on page 190
on page 276
on page 205
on page 213
on page 182
on page 180
on
on page 209