Power:modulation:type - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

24
:POWer Commands

:POWer:MODulation:TYPE

Command Syntax
:POWer:MODulation:TYPE <modulation>
<modulation> ::= {VAVerage | ACRMs | VRATio | PERiod | FREQuency
The :POWer:MODulation:TYPE command selects the type of measurement
to make in the modulation analysis:
• VAVerage
• ACRMs
• VRATio
• PERiod
• FREQuency
• PWIDth (positive pulse width)
• NWIDth (negative pulse width)
• DUTYcycle
• RISetime
• FALLtime
Query Syntax
:POWer:MODulation:TYPE?
The :POWer:MODulation:TYPE query returns the modulation type setting.
Return Format
<modulation><NL>
<modulation> ::= {VAV | ACRM | VRAT | PER | FREQ | PWID | NWID | DUTY
See Also
•
•
•
•
•
•
•
•
•
•
•
•
552
(see page 1138)
| PWIDith | NWIDth | DUTYcycle | RISetime | FALLtime}
| RIS | FALL}
":POWer:MODulation:SOURce"
":POWer:MODulation:APPLy"
":MEASure:VAVerage"
":MEASure:VRMS" on page 463
":MEASure:VRATio" on page 462
":MEASure:PERiod" on page 433
":MEASure:FREQuency"
":MEASure:PWIDth" on page 437
":MEASure:NWIDth"
":MEASure:DUTYcycle"
":MEASure:RISetime"
":MEASure:FALLtime"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 551
on page 550
on page 457
on page 426
on page 429
on page 424
on page 441
on page 425