Sbus<N>:Spi:trigger:pattern:miso:width - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh
Command Syntax
:SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh <width>
<width> ::= integer from 4 to 64 in NR1 format
The :SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh command sets the width
of the SPI data pattern anywhere from 4 bits to 64 bits.
The :SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh should be set before
N O T E
:SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA.
Query Syntax
:SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh?
The :SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh? query returns the
current SPI data pattern width setting.
Return Format
<width><NL>
<width> ::= integer from 4 to 64 in NR1 format
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
"Introduction to :TRIGger Commands"
":SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA"
":SBUS<n>:SPI:SOURce:MISO"
on page 877
on page 748
on page 746
27
:SBUS<n> Commands
749