Waveform:count - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

32
:WAVeform Commands

:WAVeform:COUNt

Query Syntax
:WAVeform:COUNt?
The :WAVeform:COUNT? query returns the count used to acquire the
current waveform. This may differ from current values if the unit has been
stopped and its configuration modified. For all acquisition types except
average, this value is 1.
Return Format
<count_argument><NL>
<count_argument> ::= an integer from 1 to 65536 in NR1 format
See Also
•
•
•
968
(see page 1138)
"Introduction to :WAVeform Commands"
":ACQuire:COUNt" on page 230
":ACQuire:TYPE" on page 239
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 961