Other Ways Of Sending Commands; Telnet Sockets; Sending Scpi Commands Using Browser Web Control - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

Other Ways of Sending Commands

Standard Commands for Programmable Instrumentation (SCPI) can also be
sent via a Telnet socket or through the Browser Web Control:
•
•

Telnet Sockets

The following information is provided for programmers who wish to
control the oscilloscope with SCPI commands in a Telnet session.
To connect to the oscilloscope via a telnet socket, issue the following
command:
telnet <hostname> 5024
where <hostname> is the hostname of the oscilloscope. This will give you a
command line with prompt.
For a command line without a prompt, use port 5025. For example:
telnet <hostname> 5025

Sending SCPI Commands Using Browser Web Control

To send SCPI commands using the Browser Web Control feature, establish
a connection to the oscilloscope via LAN as described in the InfiniiVision
3000 X- Series Oscilloscopes User's Guide. When you make the connection
to the oscilloscope via LAN and the instrument's welcome page is
displayed, select the Browser Web Control tab, then select the Remote
Programming link.
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
"Telnet Sockets" on page 71
"Sending SCPI Commands Using Browser Web Control"
3
Getting Started
on page 71
71