Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual page 231

:ACQuire:MODE
Command Syntax
:ACQuire:MODE <mode>
<mode> ::= {RTIMe | SEGMented}
The :ACQuire:MODE command sets the acquisition mode of the
oscilloscope.
• The :ACQuire:MODE RTIMe command sets the oscilloscope in real time
The obsolete command ACQuire:TYPE:REALtime is functionally equivalent to sending
N O T E
ACQuire:MODE RTIMe; TYPE NORMal.
• The :ACQuire:MODE SEGMented command sets the oscilloscope in
Query Syntax
:ACQuire:MODE?
The :ACQuire:MODE? query returns the acquisition mode of the
oscilloscope.
Return Format
<mode_argument><NL>
<mode_argument> ::= {RTIM | SEGM}
See Also
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
mode.
segmented memory mode.
"Introduction to :ACQuire Commands"
":ACQuire:TYPE" on page 239
:ACQuire Commands
on page 227
7
231