:POWer:ONOFf:NEXT
Command Syntax
:POWer:ONOFf:NEXT
The :POWer:ONOFf:NEXT command goes to the next step of the turn
on/turn off analysis.
This command is equivalent to pressing the Next softkey on the
oscilloscope front panel when prompted during the analysis.
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see
page
1138)
":POWer:ONOFf:APPLy"
":POWer:ONOFf:EXIT"
":POWer:ONOFf:TEST"
on page 553
on page 554
on page 556
24
:POWer Commands
555