Save:image:inksaver - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:SAVE:IMAGe:INKSaver

Command Syntax
:SAVE:IMAGe:INKSaver <value>
<value> ::= {{OFF | 0} | {ON | 1}}
The :SAVE:IMAGe:INKSaver command controls whether the graticule colors
are inverted or not.
Query Syntax
:SAVE:IMAGe:INKSaver?
The :SAVE:IMAGe:INKSaver? query returns a flag indicating whether
graticule colors are inverted or not.
Return Format
<value><NL>
<value> ::= {0 | 1}
See Also
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
"Introduction to :SAVE Commands"
":SAVE:IMAGe[:STARt]"
":SAVE:IMAGe:FACTors"
":SAVE:IMAGe:FORMat"
":SAVE:IMAGe:PALette"
on page 607
on page 610
on page 611
on page 612
on page 614
26
:SAVE Commands
613