Common Commands - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

Commands defined by IEEE 488.2 standard that are common to all
instruments. See
Table 64 Common (*) Commands Summary
Command
*CLS (see page 165)
*ESE <mask> (see
page 166)
n/a
n/a
n/a
*OPC (see page 172)
Agilent InfiniiVision 3000 X-Series Oscilloscopes
Programmer's Guide
5
Common (*) Commands
"Introduction to Common (*) Commands"
Query
n/a
*ESE? (see page 166)
*ESR? (see page 168)
*IDN? (see page 168)
*LRN? (see page 171)
*OPC? (see page 172)
s1
Options and Query Returns
n/a
<mask> ::= 0 to 255; an integer
in NR1 format:
Bit Weight Name Enables
--- ------ ---- ----------
7 128 PON Power On
6 64 URQ User Request
5 32 CME Command Error
4 16 EXE Execution Error
3 8 DDE Dev. Dependent Error
2 4 QYE Query Error
1 2 RQL Request Control
0 1 OPC Operation Complete
<status> ::= 0 to 255; an integer
in NR1 format
AGILENT
TECHNOLOGIES,<model>,<serial
number>,X.XX.XX
<model> ::= the model number of
the instrument
<serial number> ::= the serial
number of the instrument
<X.XX.XX> ::= the software
revision of the instrument
<learn_string> ::= current
instrument setup as a block of
data in IEEE 488.2 # format
ASCII "1" is placed in the output
queue when all pending device
operations have completed.
on page 163.
161