Wgen:arbitrary:data:dac - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:WGEN:ARBitrary:DATA:DAC

Command Syntax
:WGEN:ARBitrary:DATA:DAC {<binary> | <value>, <value> ...}
<binary> ::= decimal 16-bit integer values between -512 to +511
<value> ::= decimal integer values between -512 to +511
The :WGEN:ARBitrary:DATA:DAC command downloads an arbitrary
waveform using 16- bit integer (DAC) values.
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
in IEEE 488.2 binary block format
in comma-separated NR1 format
":WGEN:ARBitrary:DATA"
":SAVE:ARBitrary[:STARt]"
":RECall:ARBitrary[:STARt]"
on page 1000
on page 608
on page 599
33
:WGEN Commands
1003