Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual page 290

12
:DIGital<d> Commands
The DIGital subsystem commands control the viewing, labeling, and
positioning of digital channels. They also control threshold settings for
groups of digital channels, or pods.
These commands are only valid for the MSO models.
N O T E
Reporting the Setup
Use :DIGital<d>? to query setup information for the DIGital subsystem.
Return Format
The following is a sample response from the :DIGital0? query. In this case,
the query was issued following a *RST command.
:DIG0:DISP 0;THR +1.40E+00;LAB 'D0';POS +0
290 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide