Dvm:source - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:DVM:SOURce

Command Syntax
:DVM:SOURce <source>
<source> ::= {CHANnel<n>}
<n> ::= 1-2 or 1-4 in NR1 format
The :DVM:SOURce command sets the select the analog channel on which
digital voltmeter (DVM) measurements are made.
The selected channel does not have to be on (displaying a waveform) in
order for DVM measurements to be made.
Query Syntax
:DVM:SOURce?
The :DVM:SOURce? query returns the selected DVM input source.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
<n> ::= 1-2 or 1-4 in NR1 format
See Also •
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
":DVM:ENABle" on page 312
":DVM:MODE" on page 314
":DVM:ARANge" on page 310
":DVM:CURRent" on page 311
":DVM:FREQuency" on page 313
14
:DVM Commands
315