Timebase:window:position - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:TIMebase:WINDow:POSition

Command Syntax
:TIMebase:WINDow:POSition <pos value>
<pos value> ::= time from the trigger event to the zoomed (delayed)
The :TIMebase:WINDow:POSition command sets the horizontal position in
the zoomed (delayed) view of the main sweep. The main sweep range and
the main sweep horizontal position determine the range for this command.
The value for this command must keep the zoomed view window within
the main sweep range.
Query Syntax
:TIMebase:WINDow:POSition?
The :TIMebase:WINDow:POSition? query returns the current horizontal
window position setting in the zoomed view.
Return Format
<value><NL>
<value> ::= position value in seconds
See Also
•
•
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
view reference point in NR3 format
"Introduction to :TIMebase Commands"
":TIMebase:MODE" on page 867
":TIMebase:POSition"
":TIMebase:RANGe" on page 869
":TIMebase:SCALe" on page 871
":TIMebase:WINDow:RANGe"
":TIMebase:WINDow:SCALe"
on page 866
on page 868
on page 874
on page 875
30
:TIMebase Commands
873