Hardcopy:network:address - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

Oscilloscopes
Hide thumbs Also See for InfiniiVision 3000 X-Series:
Table of Contents

Advertisement

:HARDcopy:NETWork:ADDRess

Command Syntax
:HARDcopy:NETWork:ADDRess <address>
<address> ::= quoted ASCII string
The :HARDcopy:NETWork:ADDRess command sets the address for a
network printer slot. The address is the server/computer name and the
printer's share name in the \\server\share format.
The network printer slot is selected by the :HARDcopy:NETWork:SLOT
command.
To apply the entered address, use the :HARDcopy:NETWork:APPLy
command.
Query Syntax
:HARDcopy:NETWork:ADDRess?
The :HARDcopy:NETWork:ADDRess? query returns the specified address
for the currently selected network printer slot.
Return Format
<address><NL>
<address> ::= quoted ASCII string
See Also
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see
page
1138)
"Introduction to :HARDcopy Commands"
":HARDcopy:NETWork:SLOT"
":HARDcopy:NETWork:APPLy"
":HARDcopy:NETWork:DOMain"
":HARDcopy:NETWork:USERname"
":HARDcopy:NETWork:PASSword"
on page 358
on page 369
on page 366
on page 367
on page 370
on page 368
17
:HARDcopy Commands
365

Advertisement

Table of Contents
loading

Table of Contents