Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual page 218

6
Root (:) Commands
:PWRRegister[:EVENt] (Power Event Event Register)
Query Syntax
:PWRRegister[:EVENt]?
The :PWRRegister[:EVENt]? query returns the integer value contained in
the Power Event Event Register and clears the register.
Table 78 Power Event Event Register
Bit
15-3
2
1
0
Return Format
<value><NL>
<value> ::= integer in NR1 format.
See Also
•
•
•
•
•
•
•
•
218
(see page 1138)
Name Description
--- ---
Deskew Deskew Complete
Apply Apply Complete
Setup Setup Complete
"Introduction to Root (:) Commands"
":CHANnel<n>:PROTection"
":OPEE (Operation Status Enable Register)"
":OPERegister:CONDition (Operation Status Condition Register)"
page 207
":OVLenable (Overload Event Enable Register)"
":OVLRegister (Overload Event Register)"
"*STB (Read Status Byte)"
"*SRE (Service Request Enable)"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
When Set (1 = High = True), Indicates:
(Not used.)
Power analysis deskew is complete.
Power analysis apply feature is complete.
Power analysis auto setup feature is complete.
on page 190
on page 276
on page 205
on page 213
on page 182
on page 180
on
on page 211