Save:lister[:Start] - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:SAVE:LISTer[:STARt]

Command Syntax
:SAVE:LISTer[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:LISTer[:STARt] command saves the Lister display data to a file.
If a file extension is provided as part of a specified <file_name>, it must be ".csv".
N O T E
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
"Introduction to :SAVE Commands"
":SAVE:FILename" on page 609
Chapter 18, ":LISTer Commands," starting on page 375
:SAVE Commands
on page 607
26
615