Power:transient:iinitial - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:POWer:TRANsient:IINitial

Command Syntax
:POWer:TRANsient:IINitial <value>[suffix]
<value> ::= Initial current value in NR3 format
[suffix] ::= {A | mA}
The :POWer:TRANsient:IINitial command to specify the initial load current
value. The initial load current will be used as a reference and to trigger
the oscilloscope.
Query Syntax
:POWer:TRANsient:IINitial?
The :POWer:TRANsient:IINitial query returns the initial load current value.
Return Format
<value><NL>
<value> ::= Initial current value in NR3 format
See Also •
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
":POWer:SIGNals:VSTeady:TRANsient"
":POWer:TRANsient:APPLy"
":POWer:TRANsient:EXIT"
":POWer:TRANsient:INEW"
":POWer:TRANsient:NEXT"
on page 580
on page 591
on page 592
on page 594
on page 595
24
:POWer Commands
593