Sbus<N>:A429:Trigger:pattern:sdi - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:SBUS<n>:A429:TRIGger:PATTern:SDI
Command Syntax
:SBUS<n>:A429:TRIGger:PATTern:SDI <string>
<string> ::= "nn" where n ::= {0 | 1 | X}, length always 2 bits
The :SBUS<n>:A429:TRIGger:PATTern:SDI command defines the ARINC 429
two- bit SDI pattern resource according to the string parameter. This
pattern controls the SDI pattern searched for in each ARINC 429 word.
The specified SDI is only used if the :SBUS<n>:A429:FORMat includes the
SDI field.
Query Syntax
:SBUS<n>:A429:TRIGger:PATTern:SDI?
The :SBUS<n>:A429:TRIGger:PATTern:SDI? query returns the current
settings of the specified ARINC 429 two- bit SDI pattern resource in the
binary string format.
Return Format
<string><NL> in nondecimal format
Errors •
See Also
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
"- 241, Hardware missing"
"Introduction to :TRIGger Commands"
":SBUS<n>:A429:FORMat"
":SBUS<n>:A429:TRIGger:TYPE"
":SBUS<n>:A429:TRIGger:PATTern:DATA"
":SBUS<n>:A429:TRIGger:PATTern:SSM"
on page 1099
on page 877
on page 641
on page 650
on page 646
on page 648
27
:SBUS<n> Commands
647