Power:switch:vce - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:POWer:SWITch:VCE

Command Syntax
:POWer:SWITch:VCE <value>[suffix]
<value> ::= Vce(sat) value in NR3 format
[suffix] ::= {V | mV}
The :POWer:SWITch:VCE command specifies the Vce(sat) value when the
VCE conduction calculation method is chosen (by
:POWer:SWITch:CONDuction).
Query Syntax
:POWer:SWITch:VCE?
The :POWer:SWITch:VCE query returns the Vce(sat) value.
Return Format
<value><NL>
<value> ::= Vce(sat) value in NR3 format
See Also •
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
":POWer:SWITch:APPLy"
":POWer:SWITch:CONDuction"
":POWer:SWITch:IREFerence"
":POWer:SWITch:RDS"
":POWer:SWITch:VREFerence"
on page 585
on page 586
on page 587
on page 588
on page 590
24
:POWer Commands
589