Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual page 38

1
What's New
Command
:FUNCtion:LINear:GAIN (see
:FUNCtion:LINear:OFFSet (see
:FUNCtion:TRENd:MEASurement (see
page
:MEASure Power Commands (see
:MEASure:STATistics:DISPlay (see
:POWer Commands (see
:PWRenable (Power Event Enable Register)
(see
:PWRRegister[:EVENt] (Power Event Event
Register) (see
:RECall:ARBitrary[:STARt] (see
:SAVE:ARBitrary[:STARt] (see
:SAVE:POWer[:STARt] (see
:SBUS<n>:A429 Commands (see
:SBUS<n>:FLEXray Commands (see
:SBUS<n>:M1553 Commands (see
:SEARch:SERial:A429 Commands (see
page
38
page
page
355)
page 529)
page 216)
page 216)
page
page
page
802)
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
Description
344) Specifies the 'A' value in the Ax + B operation.
Available with the DSOX3ADVMATH advanced
math license.
345) Specifies the 'B' value in the Ax + B operation.
Available with the DSOX3ADVMATH advanced
math license.
Selects the measurement whose trend is
shown in the math waveform. Available with
the DSOX3ADVMATH advanced math license.
page 469) :MEASure commands available when the
DSOX3PWR power measurements and
analysis application is licensed and enabled.
page 447) Specifies whether the display of measurement
statistics is on or off.
Commands for the DSOX3PWR power
measurements and analysis application.
For enabling bits in the Power Event Enable
Register. This status register control is
available when the DSOX3PWR power
measurements and analysis application is
licensed.
For reading power application status bits in the
Power Event Event Register. This query is
available when the DSOX3PWR power
measurements and analysis application is
licensed.
599) Recalls waveform generator arbitrary
waveforms from a file.
608) Saves waveform generator arbitrary waveforms
to a file.
618) Saves the power measurement application's
current harmonics analysis results to a file.
page 634) Commands for ARINC 429 triggering and serial
decode.
page 669) Commands for FlexRay triggering and serial
decode.
page 731) Commands for MIL-STD 1553 triggering and
serial decode.
Commands for finding ARINC 429 events in the
captured data.