Command Differences From 7000B Series Oscilloscopes - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

Command Differences From 7000B Series Oscilloscopes

The Agilent InfiniiVision 3000 X- Series oscilloscopes command set is most
closely related to the InfiniiVision 7000B Series oscilloscopes (and the
7000A Series, 6000 Series, and 54620/54640 Series oscilloscopes before
them).
The main differences between the version 1.00 programming command set
for the InfiniiVision 3000 X- Series oscilloscopes and the 6.10 programming
command set for the InfiniiVision 7000B Series oscilloscopes are related
to:
• Built- in waveform generator (with Option WGN license).
• Built- in demo signals (with Option EDU license that comes with the
• Reference waveforms (in place of trace memory).
• Multiple serial decode waveforms.
• Serial decode now available on 2- channel oscilloscopes.
• Enhanced set of trigger types.
• Additional measurements.
• Different path name format for internal and USB storage device
More detailed descriptions of the new, changed, obsolete, and discontinued
commands appear below.
New Commands
Command
:DEMO Commands (see
page
:HARDcopy:NETWork
Commands (see
:MEASure:AREA (see
page
:MEASure:BWIDth (see
page
:MEASure:NEDGes (see
page
:MEASure:NPULses (see
page
:MEASure:PEDGes (see
page
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
N6455A Education Kit).
locations.
281)
page 357)
409)
410)
427)
428)
432)
Description
Commands for using built-in demo signals (with the Option EDU
license that comes with the N6455A Education Kit).
For accessing network printers.
Measures the area between the waveform and the ground level.
Measures the burst width from the first edge on screen to the
last.
Counts the number of falling edges.
Counts the number of negative pulses.
Counts the number of rising edges.
1
What's New
45