:MEASure:NEDGes
Command Syntax
:MEASure:NEDGes [<source>]
<source> ::= {CHANnel<n> | FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<r> ::= 1-2 in NR1 format
The :MEASure:NEDGes command installs a falling edge count measurement
on screen. If the optional source parameter is not specified, the current
source is measured.
This command is not available if the source is FFT (Fast Fourier Transform).
N O T E
Query Syntax
:MEASure:NEDGes? [<source>]
The :MEASure:NEDGes? query measures and returns the on- screen falling
edge count.
Return Format
<value><NL>
<value> ::= the falling edge count in NR3 format
See Also
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see
page
1138)
"Introduction to :MEASure Commands"
":MEASure:SOURce"
on page 406
on page 444
20
:MEASure Commands
427