Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual page 162

5
Common (*) Commands
Table 64 Common (*) Commands Summary (continued)
Command
n/a
*RCL <value> (see
page 175)
*RST (see page 176)
*SAV <value> (see
page 179)
162
Query
*OPT? (see page 173)
n/a
n/a
n/a
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
Options and Query Returns
<return_value> ::= 0,0,<license
info>
<license info> ::= <All field>,
<reserved>, <MSO>, <reserved>,
<Memory>, <Low Speed Serial>,
<Automotive Serial>, <reserved>,
<reserved>,
<Power Measurements>,
<RS-232/UART Serial>,
<Segmented Memory>, <Mask Test>,
<reserved>, <Bandwidth>,
<reserved>, <reserved>,
<reserved>, <I2S Serial>,
<reserved>, <reserved>,
<Waveform Generator>,
<reserved>, <reserved>
<All field> ::= {0 | All}
<reserved> ::= 0
<MSO> ::= {0 | MSO}
<Memory> ::= {0 | MEMUP}
<Low Speed Serial> ::= {0 | EMBD}
<Automotive Serial> ::= {0 |
AUTO}
<Power Measurements> ::= {0 |
PWR}
<RS-232/UART Serial> ::= {0 |
COMP}
<Segmented Memory> ::= {0 | SGM}
<Mask Test> ::= {0 | MASK}
<Bandwidth> ::= {0 | BW20 | BW50}
<I2S Serial> ::= {0 | AUDIO}
<Waveform Generator> ::= {0 |
WAVEGEN}
<value> ::= {0 | 1 | 4 | 5 | 6 |
7 | 8 | 9}
See *RST (Reset) (see
<value> ::= {0 | 1 | 4 | 5 | 6 |
7 | 8 | 9}
page 176)