Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual page 190

6
Root (:) Commands
Table 69 Root (:) Commands Summary (continued)
Command
n/a
:STOP (see page 223)
n/a
:VIEW <source> (see
page 225)
Introduction to Root level commands control many of the basic operations of the
Root (:)
instrument. These commands are always recognized by the parser if they
Commands are prefixed with a colon, regardless of current command tree position.
After executing a root- level command, the parser is positioned at the root
of the command tree.
190
Query
:STATus? <display>
(see page 222)
n/a
:TER? (see page 224)
n/a
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
Options and Query Returns
{0 | 1}
<display> ::= {CHANnel<n> |
DIGital<d> | POD{1 | 2} | BUS{1 |
2} | FUNCtion | MATH | SBUS{1 |
2} | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
n/a
{0 | 1}
<source> ::= {CHANnel<n> |
FUNCtion | MATH | SBUS{1 | 2} |
WMEMory<r>} for DSO models
<source> ::= {CHANnel<n> |
DIGital<d> | POD{1 | 2} | BUS{1 |
2} | FUNCtion | MATH | SBUS{1 |
2} | WMEMory<r>} for MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format