What's New In Version 2.00 - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

What's New in Version 2.00

New features in version 2.00 of the InfiniiVision 3000 X- Series oscilloscope
software are:
• Support for the DSOX3WAVEGEN waveform generator's new arbitrary
• Support for the new DSOX3VID extended Video triggering license.
• Support for the new DSOX3AERO MIL- STD- 1553 and ARINC 429
• Support for the new DSOX3FLEX FlexRay triggering and serial decode
• Support for the new DSOX3PWR power measurements and analysis
• Support for the new DSOX3ADVMATH advanced math measurements
More detailed descriptions of the new and changed commands appear
below.
New Commands
Command
:FUNCtion:BUS:CLOCk (see
:FUNCtion:BUS:SLOPe (see
:FUNCtion:BUS:YINCrement (see
:FUNCtion:BUS:YORigin (see
:FUNCtion:BUS:YUNits (see
:FUNCtion:FREQuency:HIGHpass (see
page
:FUNCtion:FREQuency:LOWPass (see
page
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
waveform type.
triggering and serial decode license.
license.
license.
license.
page
page
page
page
338)
339)
Description
328) Selects the clock signal source for the Chart
Logic Bus State operation. Available with the
DSOX3ADVMATH advanced math license.
329) Specifies the clock signal edge for the Chart
Logic Bus State operation. Available with the
DSOX3ADVMATH advanced math license.
page 330) Specifies the value associated with each
increment in Chart Logic Bus data. Available
with the DSOX3ADVMATH advanced math
license.
331) Specifies the value associated with Chart Logic
Bus data equal to zero. Available with the
DSOX3ADVMATH advanced math license.
332) Specifies the vertical units for the Chart Logic
Bus operations. Available with the
DSOX3ADVMATH advanced math license.
Sets the high-pass filter's -3 dB cutoff
frequency. Available with the
DSOX3ADVMATH advanced math license.
Sets the low-pass filter's -3 dB cutoff
frequency. Available with the
DSOX3ADVMATH advanced math license.
1
What's New
37