What's New in Version 2.20
New features in version 2.20 of the InfiniiVision 3000 X- Series oscilloscope
software are:
• Support for modulation of the waveform generator output.
• Support for controlling the optional DSOXDVM digital voltmeter analysis
• Power measurements application modifications.
• Ability to turn reference waveform locations on or off and view their
More detailed descriptions of the new and changed commands appear
below.
New Commands
Command
:DVM Commands (see
:MEASure:CPLoss (see
:POWer:SIGNals:CYCLes:HARMonics (see
page
:POWer:SIGNals:CYCLes:QUALity (see
page
:POWer:SIGNals:DURation:EFFiciency (see
page
:POWer:SIGNals:DURation:MODulation (see
page
:POWer:SIGNals:DURation:ONOFf:OFF (see
page
:POWer:SIGNals:DURation:ONOFf:ON (see
page
:POWer:SIGNals:DURation:RIPPle (see
page
:POWer:SIGNals:DURation:TRANsient (see
page
:POWer:SIGNals:VMAXimum:INRush (see
page
:POWer:SIGNals:VMAXimum:ONOFf:OFF (see
page
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
feature
status using the :VIEW, :BLANk, and :STATus commands.
page
309)
page
474)
565)
566)
567)
568)
569)
570)
571)
572)
575)
576)
Description
Commands for controlling the optional
DSOXDVM digital voltmeter analysis feature.
Installs a power loss per cycle measurement on
screen or returns the measured value.
Specifies the number of cycles to include in the
current harmonics analysis.
Specifies the number of cycles to include in the
power quality analysis.
Specifies the duration of the efficiency
analysis.
Specifies the duration of the modulation
analysis.
Specifies the duration of the turn off analysis.
Specifies the duration of the turn on analysis.
Specifies the duration of the output ripple
analysis.
Specifies the duration of the transient
response analysis.
Specifies the maximum expected input voltage
for inrush current analysis.
Specifies the maximum expected input voltage
for turn off analysis.
1
What's New
33