Measure:window - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

20
:MEASure Commands

:MEASure:WINDow

Command Syntax
:MEASure:WINDow <type>
<type> ::= {MAIN | ZOOM | AUTO}
When the zoomed time base is displayed, the :MEASure:WINDow command
lets you specify the measurement window:
• MAIN — the measurement window is the upper, Main window.
• ZOOM — the measurement window is the lower, Zoom window.
• AUTO — the measurement is attempted in the lower, Zoom window; if it
Query Syntax
:MEASure:WINDow?
The :MEASure:WINDow? query returns the current measurement window
setting.
Return Format
<type><NL>
<type> ::= {MAIN | ZOOM | AUTO}
See Also •
•
466
(see page 1138)
cannot be made there, the upper, Main window is used.
"Introduction to :MEASure Commands"
":MEASure:SOURce"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 406
on page 444