Measure:vmax - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:MEASure:VMAX

Command Syntax
:MEASure:VMAX [<source>]
<source> ::= {CHANnel<n> | FUNCtion | MATH | WMEMory<r>}
<n> ::= 1-2 or 1-4 (# of analog channels) in NR1 format
<r> ::= 1-2 in NR1 format
The :MEASure:VMAX command installs a screen measurement and starts a
maximum vertical value measurement. If the optional source parameter is
specified, the current source is modified.
Query Syntax
:MEASure:VMAX? [<source>]
The :MEASure:VMAX? query measures and outputs the maximum vertical
value present on the selected waveform.
Return Format
<value><NL>
<value> ::= maximum vertical value of the selected waveform in
See Also
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
NR3 format
"Introduction to :MEASure Commands"
":MEASure:SOURce"
":MEASure:VMIN" on page 460
":MEASure:VPP" on page 461
":MEASure:VTOP" on page 465
on page 406
on page 444
20
:MEASure Commands
459