Function:source2 - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

16
:FUNCtion Commands

:FUNCtion:SOURce2

Command Syntax
:FUNCtion:SOURce2 <value>
<value> ::= {CHANnel<n> | NONE}
<n> ::= {1 | 2 | 3 | 4} for 4ch models
<n> ::= {1 | 2} for 2ch models
The :FUNCtion:SOURce2 command specifies the second source for math
operator functions that have two sources. (The :FUNCtion:SOURce1
command specifies the first source.)
The :FUNCtion:SOURce2 setting is not used for the transform functions,
filter functions, or visualization functions (except when the measurement
trend visualization's measurement requires two sources).
Query Syntax
:FUNCtion:SOURce2?
The :FUNCtion:SOURce2? query returns the currently specified second
source for math operations.
Return Format
<value><NL>
<value> ::= {CHAN<n> | NONE}
<n> ::= {1 | 2 | 3 | 4} for 4ch models
<n> ::= {1 | 2} for 2ch models
See Also •
•
•
354
(see page 1138)
"Introduction to :FUNCtion Commands"
":FUNCtion:OPERation"
":FUNCtion:SOURce1"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 326
on page 347
on page 352