Sbus<N>:Spi:width - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:SBUS<n>:SPI:WIDTh
Command Syntax
:SBUS<n>:SPI:WIDTh <word_width>
<word_width> ::= integer 4-16 in NR1 format
The :SBUS<n>:SPI:WIDTh command determines the number of bits in a
word of data for SPI.
Query Syntax
:SBUS<n>:SPI:WIDTh?
The :SBUS<n>:SPI:WIDTh? query returns the current SPI decode word
width.
Return Format
<word_width><NL>
<word_width> ::= integer 4-16 in NR1 format
Errors
•
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
"- 241, Hardware missing"
"Introduction to :SBUS<n> Commands"
":SBUS<n>:MODE" on page 633
":SBUS<n>:SPI Commands"
on page 1099
on page 629
on page 738
27
:SBUS<n> Commands
753