Sbus<N>:A429:Format - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:SBUS<n>:A429:FORMat
Command Syntax
:SBUS<n>:A429:FORMat <format>
<format> ::= {LDSDi | LDSSm | LDATa}
The :SBUS<n>:A429:FORMat command specifies the word decode format:
• LDSDi:
• LDSSm:
• LDATa:
Query Syntax
:SBUS<n>:A429:FORMat?
The :SBUS<n>:A429:FORMat? query returns the current ARINC 429 word
decode format setting.
Return Format
<format><NL>
<format> ::= {LDSD | LDSS | LDAT}
Errors
•
See Also
•
•
•
•
•
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
• Label - 8 bits.
• SDI - 2 bits.
• Data - 19 bits.
• SSM - 2 bits.
• Label - 8 bits.
• Data - 21 bits.
• SSM - 2 bits.
• Label - 8 bits.
• Data - 23 bits.
"- 241, Hardware missing"
"Introduction to :SBUS<n> Commands"
":SBUS<n>:MODE" on page 633
":SBUS<n>:A429:TRIGger:PATTern:DATA"
":SBUS<n>:A429:TRIGger:PATTern:SDI"
":SBUS<n>:A429:TRIGger:PATTern:SSM"
":SBUS<n>:A429:TRIGger:TYPE"
":SBUS<n>:A429:SIGNal"
":SBUS<n>:A429:SPEed"
":SBUS<n>:A429:BASE"
":SBUS<n>:A429:SOURce"
on page 1099
on page 629
on page 646
on page 647
on page 648
on page 650
on page 642
on page 644
on page 637
on page 643
27
:SBUS<n> Commands
641