Power:transient:apply - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:POWer:TRANsient:APPLy

Command Syntax
:POWer:TRANsient:APPLy
The :POWer:TRANsient:APPLy command applies the transient analysis
using the initial current and new current settings.
See Also •
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
":POWer:TRANsient:EXIT"
":POWer:TRANsient:IINitial"
":POWer:TRANsient:INEW"
":POWer:TRANsient:NEXT"
":MEASure:TRESponse"
on page 592
on page 593
on page 594
on page 595
on page 488
24
:POWer Commands
591